Paint over ceramic tile walls, floors, shower stalls or countertops when the tile color becomes dated, worn or scratched. Removing old tile that is no longer appealing does not necessarily require ripping it and replacing it. The process is fairly easy, although time consuming, but the results are beautiful.
- Trisodium phosphate
- Fine grade sandpaper
- Extra fine grade sandpaper
- Low tack masking tape
- Low nap rollers
- High quality paint brush
- Epoxy primer
- Epoxy paint
Prepare the Tile
- Repair any loose, broken, chipped or cracked grout before painting.
- Wash the tile to remove all traces of cleansers or wax. Use trisodium phosphate to thoroughly clean the surface. Rinse very well with plain water after cleaning.
- Use a fine grade sandpaper to rough up the tile surface, creating a good bonding surface for the primer and paint.
- Vacuum up all dust and rinse the walls to wash dust particles away.
Preparing the Room for Paint
- Apply low tack painters’ masking tape to ceilings, mirrors, cabinets, walls or floors to protect from drips, spills and pain accidents.
- Place drop cloths on the floors.
Priming Ceramic Tile
- Use a high quality epoxy primer. Newer formulations of epoxy primers no longer require acid etching making the project much easier.
- Apply the epoxy primer with a very low nap paint roller. Do not use a paint brush because brush strokes are highly visible.
- Allow the primer to dry completely.
- Light sand the walls with an extra fine sandpaper.
- Apply a second coat of primer.
Painting Ceramic Tile
- Apply epoxy paint to the ceramic tile with a snort nap, lint free roller. Use a high quality paint brush to cut in corners and ceilings.
- Epoxy can be painted over the grout and then repaint grout lines or leave them all one color. The other options is to carefully paint around grout line which makes the job much more difficult and will require a very steady hand.
- Apply 2 to 3 coats of epoxy paint, allowing each coat to dry completely in between each coat.
Although not required because epoxy paint dries to a super hard finish, it is a good idea to seal painted ceramic tile floors with a urethane sealer. Apply 3 to 4 coats of sealer, allowing each coat to dry thoroughly before painting on the next.
Changing an ugly countertop, a worn floor or a tiled pink blue and orange bathroom is as easy as applying several coats of paint. The project is somewhat time consuming especially waiting for coats of paint to dry, but will be accomplished successfully by a do it yourself type homeowner.